Category Archives: armada-38x

ARMADA 388 ClearFog: Install LEDE into eMMC in an easy way

Last time I have talked about the install of system into eMMC flash. This process is rather complicated and time consuming. After that I have a further research of the current LEDE project, Solid-Run forum and Armbian forum. And I … Continue reading

Posted in armada-38x, ClearFog Pro, LEDE, OpenWRT | Leave a comment

ARMADA 388 ClearFog: Install system into eMMC in a hard way

UPDATE I have posted a new article to simplify this process. This week I have got the ClearFog SOM with a eMMC flash on it. The serial number of this eMMC is KLM8G1GEND B031 which indicate that it comes from SAMSUNG … Continue reading

Posted in armada-38x, ClearFog Pro | Leave a comment

ARMADA 388 ClearFog: Initial LEDE support

The LEDE project is founded as a spin-off of the OpenWrt project and shares many of the same goals. We are building an embedded Linux distribution that makes it easy for developers, system administrators or other Linux enthusiasts to build … Continue reading

Posted in armada-38x, ClearFog Pro, LEDE | Leave a comment

ARMADA 388 ClearFog: Enable mmc driver

OpenWRT trunk does not enable mmc driver defautly in the 4.1 and 4.4 Linux kernel. Therefore the img can not load file system from SD card. We need add extra Linux kernel module to enable these features. References: https://patchwork.ozlabs.org/patch/618593/

Posted in armada-38x, ClearFog Pro, OpenWRT | Leave a comment

ARMADA 388 ClearFog: Enable Linux 4.4 for OpenWRT

OpenWRT trunk has support of Linux 4.1 for MVEBU platform. And it also maintains 4.4 as well. In order to use 4.4 in ClearFog board and PCIe bus, you should not only switch to 4.4 kernel but also enable i2c … Continue reading

Posted in armada-38x, ClearFog Pro | Leave a comment

ARMADA 388 ClearFog: Add uboot-tools and fw_env.config

Clearfog Pro has a SD card slot which stores U-boot, device tree blob, Linux kernel and file system. We could modify the uboot paramenters directly from U-boot shell or from the userspace application called uboot-envtools. The uboot-envtools reads config file … Continue reading

Posted in armada-38x, ClearFog Pro, 未分类 | Leave a comment

ARMADA 388 Clearfog: Device Tree Inheritance

Image | Posted on by | Leave a comment